Wideband Frequency Coverage
Supports RF amplification across the 700–1600MHz range in one module.
Wide Band PA Module of 1W 700–1600MHz
The BTPA0716M-1W1005C is a wideband RF power amplifier module designed to amplify RF signals across the 700–1600MHz frequency range, featuring 1W output power, 45dB minimum gain, and integrated VSWR protection.
Operating Frequency
700–1600 MHz
Output Power
1W
Maximum Gain
45 dB
Power Supply
2 VDC
Product Overview
The BTPA0716M-1W1005C is a wideband RF power amplifier module operating from 700MHz to 1600MHz. It is designed for RF systems that require signal amplification across a broad frequency range within a single module.
The module amplifies RF input signals to a specified output power of 30 ± 1dBm. Its 45dB minimum gain supports applications that require increased RF signal levels, while its wide operating frequency range provides flexibility when integrating it into compatible wireless communication equipment.
The module features a built-in circulator-based VSWR protection arrangement with a 20W load and hybrid coupler, a built-in -20dB coupling port, and an SMA RF connector. Its compact 100 × 45 × 20mm form factor, excluding connectors, supports integration into space-constrained RF equipment. Other connectors can be customized according to project requirements.
Key Advantages
1W RF Output Power
Provides a specified output power of 30 ± 1dBm, with a saturation power of 36dBm.
45dB Minimum Gain
Provides high gain for RF signal amplification within its specified operating range.
Built-in VSWR Protection
Uses a circulator with a 20W load and hybrid coupler for the specified protection arrangement.
Controlled RF Performance
Features maximum 3.5dB peak-to-peak in-band ripple and IM3 below -40dBc under the specified test conditions.
Compact, Integration-Friendly Design
Measures 100 × 45 × 20mm without connectors and weighs less than 350g.
Technical Specifications
RF Performance
| Operating Frequency / Output Port Range | 700–1600MHz |
|---|---|
| Output Power | 30 ± 1dBm |
| Saturation Power (Psat) | 36dBm |
| Minimum Gain | 45dB |
| In-Band Ripple | 3.5dB max. peak-to-peak |
| Out-of-Band Spurious Emissions | 9kHz–1GHz: ≤ -36dBm/30kHz; 1–12.75GHz: ≤ -30dBm/30kHz |
| Maximum Input Power Without Damage | -15dBm (as stated in datasheet) |
| IM3 | < -40dBc @ two CW tones of +27dBm |
| Harmonics | < -45dBc |
| VSWR Protection | Built-in circulator with 20W load and hybrid coupler |
Electrical Specifications
| Power Supply | 12 ± 1VDC |
|---|---|
| Operating Current | 1.50A max. |
| I/O Interface | DC12V, GND, Enable |
| Built-in Coupler | DC1700B20 |
| Coupling Factor | -20dB |
| Coupler Port | SMB |
Mechanical Specifications
| Dimensions | 100 × 45 × 20mm, excluding connectors |
|---|---|
| Weight | Less than 350g |
| RF Connector | SMA; other connectors can be customized |
Environmental Specifications
| Operating Temperature | −25°C to +65°C |
|---|
Dimension Drawing
BTPA0716M-1W1005C - Mechanical Dimensions
The specification sheet provides the overall dimensions but does not include a complete mechanical drawing with mounting-hole positions. Use the original engineering drawing for installation design.
Length100mm
Width45mm
Height20mm
Applications & Technology
RF Test and Measurement Systems
Can be evaluated as an RF amplification component in laboratory setups that require signal-level adjustment across compatible frequencies.
Wireless Communication Equipment
May be integrated into compatible RF equipment requiring amplification within the 700–1600MHz range.
RF Signal Conditioning
Provides a potential amplification stage in RF signal chains, subject to the system's gain, power and linearity requirements.
Wireless Data and Telemetry Equipment
Can be assessed for compatible wireless data systems operating within the module's specified frequency range.
RF Engineering and Prototype Development
Suitable for evaluation during RF prototype development where wideband amplification and defined electrical interfaces are required.
Frequently Asked Questions
Q1. What is the operating frequency range of the BTPA0716M-1W1005C?
The module operates across 700–1600MHz, according to the manufacturer's datasheet.
Q2. What are its output power and gain?
The specified output power is 30 ± 1dBm, equivalent to approximately 1W. The saturation power is 36dBm, and the minimum gain is 45dB.
Q3. What power supply does this RF power amplifier module require?
It requires a 12 ± 1VDC power supply, with a maximum operating current of 1.50A.
Q4.Does the module have built-in VSWR protection?
Yes. The datasheet specifies a built-in circulator with a 20W load and hybrid coupler as the VSWR protection arrangement. Confirm the operating conditions and protection limits with the manufacturer.
Q5. What are the module's dimensions, weight and RF connector?
Its dimensions are 100 × 45 × 20mm, excluding connectors. Its weight is less than 350g, and the standard RF connector is SMA. Other connector types can be customized.
Q6. Can this wideband PA module be customized for a specific wireless communication project?
The datasheet explicitly mentions connector customization. Other changes, such as frequency coverage, gain or output power, should be treated as project-specific requests requiring manufacturer confirmation rather than guaranteed standard options.
